{"product_id":"rfx-pro-flexi-tip-brake-pedal-blu-3","title":"RFX PRO FLEXI-TIP BRAKE PEDAL, BLU","description":"RFX Pro Series Brake Pedals are designed and tested at the highest level.\n\r\nPro Series Brake Pedals are manufactured from 7075-T6 aluminium and feature an OEM type forged shaft, a smooth finish on the shaft helps to reduce the wear associated with a ridged design.\n\r\nPro Series Flexible tips are CNC machined billet aluminium and feature a spring loaded rotatable tip which under impact such as in a rut will spin to reduce damage. The tip also features steel teeth to help grip in muddy conditions.\n\r\nPro Series Flexible tips also incorporate a stop on the pivot tip, this stops the tip at 90 degrees of rotation preventing damage that can occur if the tip rotates under the clutch cover.\n\r\nPro Series Brake Pedals also incorporate a cable brake snake, this helps prevent the pedal shaft being bent around in a collision.\n\r\nCNC Flexible Tip to reduce impact damage\n\r\nCold Forged Arm for improved core strength\nFeatures:\n\nMade from 7075 aerospace aluminium construction.\nT6 heat treated to increase tensile strength.\nForged shaft for increased core strength.\nSmooth shaft design to reduce surface wear.\nCNC machined billet flexible tip.\nRotating action reduces impact damage.\nSteel insert teeth for increased grip.\nMechanical stop on the tip.\nIncorporated brake snake.\nColour anodised to prevent corrosion.\nLaser etched logo.\n\nFitting Instructions:\n\nStart by taking note mark where the height if the pedal tip is in relation to the footpeg.\nRemove the R-clip or split pin from the rear of the brake bolt located behind the frame.\nRemove the pivot bolt holding the pedal to the frame.\nDetach the return spring from the pedal and leave hanging.\nSpin the pedal outwards exposing the split pin at the rear of the pedal clevis.\nRemove this split pin and the locating dowel, the rear brake pedal will now remove.\nRemove the oil seals from the old pedal clean and re-fit to the new pedal.\nClean all the parts with a multi-purpose lube such as maxima MPPL, ready for re-installing.\nRe- fit the Brake clevis, Locating pin and split pin.\nRe-Fit the return spring.\nApply some Maxima waterproof grease to the pivot bolt align the pivot hole and re-fit the bolt.\nTorque the pivot bolt to the required torque as per the owner’s manual.\nRe-fit the R-clip\/Split pin to the rear of the pivot bolt.\nWith the pedal now attached adjust the pedal height to the correct position and free play, do this by loosening the nut above the clevis and turning the plunger bolt inwards or outwards to suit.\nNow fit the brake snake.\nJapanese models- Remove the lower engine mount nut and washer, replace the old washer with the new washer which is attached to the brake snake.\nKTM models- Remove the new washer which is attached to the brake snake, put this aside as it’s not required on the KTM, loop the cable around the lower engine mount and replace inside the crimp fitting.\nSet the correct tension on the brake snake, remembering to allow for the pedal to extend down.\nCrimp the fitting together using pliers and trim excess cable.","brand":"RFX","offers":[{"title":"Default Title","offer_id":58193610113372,"sku":"1128646","price":93.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/5072\/8284\/files\/800Wx800H-1128646-1.jpg?v=1783129721","url":"https:\/\/checkout.xparts.weostores.com\/products\/rfx-pro-flexi-tip-brake-pedal-blu-3","provider":"xparts","version":"1.0","type":"link"}